Home / Support / Installation guide
The unit plugs into your boat’s NMEA 2000 network in about ten minutes. Here are the main steps; the full guide can be downloaded below, in four languages.
It is where your instruments are connected. Follow the cable from your log or wind sensor to the network.
Into a free port on the network, or through a T-connector if all ports are in use. The unit is powered directly by the network.
Create your account and enter your unit’s number by scanning the QR code on the side of the unit. Your boat appears on the map as soon as the instruments are switched on.
The unit connects via NMEA 2000. Depending on your installation, you may need an accessory.
Plug directly into a free port on the network.
SeaTalk NG to NMEA 2000 (female) cable, available in the shop.
T-connector, available in the shop.
Write to us at support@oceanovox.com, or read the FAQ. We reply within one business day.